(239) 454-6787

6710 Winkler Rd # 8
Fort Myers, FL 33919

http://www.continentalcaststone.com

Map & Directions

Web Results:

Inspection and Acceptance

Inspection and Acceptance Design Tips - Technical Bulletin #36 On site inspection and acceptance of Cast Stone should be performed at time of delivery and again after all material has been installed, pointed and cleaned. Final Inspection should be done prior to application of water repellents. The o...

Pointing of Joints (#44)

Pointing of Joints Design Tips - Technical Bulletin #44 Always rake and point mortar joints rather than full-bed setting and finishing in one operation. Mortar joints are best suited for masonry-bound trim items such as belt courses, lintels, window surrounds, date stones, inscription blocks, quoins...

Patching Instructions for Cast Stone- Step 7

1 2 3 4 5 6 7 8 9 Always try a test patch and obtain approval before proceeding with the balance of the work. Shown here is a specially cut wooden corner tool which makes it easier to tool the patch at edge conditions. Alternatively, rub a piece of Styrofoam against the stone until it forms into the...

Dimensional Considerations

Allowing for Movement of Masonry Materials Design Tips - Technical Bulletin #52 Building materials may experience dimensional changes and movement due to environmental conditions, such as temperature and moisture, or movement of adjacent building elements. If this movement is restrained, cracking ma...

Patching Instructions for Cast Stone- Step 1

1 2 3 4 5 6 7 8 9 To patch you must have a container of fresh patching material (with no lumps in it), a bottle of white acrylic liquid bonding agent, some mixing containers and possibly some grey cement. Typical corner damage is shown here. Next ...

Business Information:

Related Categories:

• Management Consulting Services
• Human Resource Consulting Services
• Marketing Consulting Services
• Process, Physical Distribution, and Logistics Consulting Services

Website Links:

Continental Cast Stone Mfg., Inc. | Select Stone Veneer | BULLETINS | Inspection and Acceptance | Freeze / Thaw Durability (#40) | Air Entrainment Admixtures... | Production | Patching (#38) | Cleaning and Patching | Dimensional Considerations | Crazing (#32) | About Cast Stone | Pointing of Joints (#44) | Related Links | Portfolio of Photos | Hot Weather Setting | Cold Weather Setting... | Reinforcement for Cast... | Thin Wall Systems | Sealants (#43)